|
Title:
GCS Acrylic Certificate Frame
Client: GCS Consultants
Size: 290mmW x 380mmH x 20mmD
This certificate frame is designed to hold an A4 page but we can also
make frames to suit any sized image. The frame is held together with
4 bolts going through the corners of the frame, which is finished,
on the front with our own aluminium “nubs”. The unit hangs
on the wall with 2 “keyhole” blocks concealed on the back.
|
|
|
Title:
ACS Sandwich Poster Holder
Client: ACS
Size: 450mmW x 600mmH x 20mmD
This certificate frame is designed to hold an A3 page but we can also
make frames to suit any sized image. The frame is held together with
4 bolts going through the corners of the frame, which is finished,
on the front with our own aluminium “nubs”. The unit hangs
on the wall with 2 “keyhole” blocks concealed on the back.
To create a coloured border all around the A3 poster, sign writing
vinyl has been applied to the back panel.
|
|
|
Title:
New Zealand Post Certificate Holder
Client: Communication Arts
Size: 350mmW x 230mmH x 20mmD
This certificate holder is in essence a simple folded poster holder
that allows a card to be slipped in. After folding the rectangular,
the unit is cut to follow the shape of the die cut certificate. A
keyhole hanger on the back allows the certificate holder to be wall
mounted.
|
|
|
Title:
Snap Frames
Client: Snap Frames
Size: 260mmW x 350mmH x 30mmD
These images show the 2 different profiles of snap frames –
rounded (like some picture frames) and flat. This modern aluminium
“snap” frame is so called because it can be “snapped
open” to allow the image to be changed - all 4x sides of the
frame open and close with a spring hinging mechanism. The mechanism
is not obvious, so these frames are excellent for high traffic areas
where there is some supervision and where the posters need to be changed
out regularly. The poster frames can be made in any size, but are
stocked in standards sizes being A5 up to A0
|
|
|
Title:
A1 VTNZ Wall Poster
Client: VTNZ
Size: 595mmW x850 mmH x 15mmD
These are a basic folded poster holder designed for wall mounting.
They have a fold at the top and the bottom and the acrylic meets at
the back. Because of this design they will not “droop”
open with the heat but the posters need to be loaded from the side,
making them a little harder to load than top loading poster holders.
On the back 2 keyholes allow the poster to be wall mounted. This poster
holder is A1 in size but any size can be made.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Member
of the New Zealand Sign and Display Association
ISO
9001 : 2000 Certified